|
|
|
|
Group: Forum Members
Last Login: Friday, December 23, 2011 9:07 AM
Posts: 9,
Visits: 29
|
Hi
I have a dgn file of size 59700 KB ( vendor model attached in PDS through reference discipline)
Originally its not a .dgn file and I guess this file has been converted into microstation file to be able to reference in PDS.
When I open SPR session and while particularly in Encircle mode whenever I make a move then the session hangs with the following message.
" Building encircle model list 18 of 40 lists by DMRS linkage ; Hit esc to cancel ; Reviewing elements .. "
If I hit esc then it is ok but every time I make a move I have to do this .If I dont cancel it then it takes lot of time reviewing all elements.
This is not happening when I switch off the vendor model in SPR .
Thanks .
Chandraa
|
|
|
|
|
Group: Administrators
Last Login: Thursday, April 12, 2012 11:29 AM
Posts: 5,
Visits: 178
|
Hi Chandraa,
I am not sure why this is happening, however we have actually moved away from using SmartPlant Review for a number of these reasons as we have found that SPR hangs quite alot as well as when loading a model in SPR it makes our workstations un-usable as it seems to use all of the CPU.
I know this is not a solution but we have moved to using ModeInsight form Ticodi as it does not have any of these problems and also it has a great model commenting tool ReviewInsight which we find invaluable. Have a look http://www.ticodi.com
I will however have a look at this problem and see if I know why this is happening
Best Regards
PDExperts
www.pdexperts.com
contact@pdexperts.com
|
|
|
|
|
Group: Forum Members
Last Login: Wednesday, November 10, 2010 10:54 AM
Posts: 13,
Visits: 56
|
Hi Chandra. we have also seen this problem while using 3rd party models as references in PDS.
Usually when these models are converted to DGN files, u have to convert the surfaces to solids.. I think there is some functionality in MS v8 to do that. Then u can export and save the file in V7 format.. i am looking for documentation on this matter.. hopefully i will find it soon..
|